The features of the ST-MDC control
1. Simple wiring: input dc motor can run programmatically;
2. Periods of control program: it can realize continuous forward,continuous reverse, continuous positive & nagetive, Five period ofmovement control mode can be realized;
3. Upper machine communication, through RS232 serial portcommunication, realize the PC computer and control communications.It can be realize multistratum control and speed setting by changingthe machine's settings through the computer;
4. External control signal input and output; It can Support 3 signalinput, 3 Signal output: easy to accept external models of input andoutput, such as switches, optoelectronic switch, electromagnetic valveControl, etc;
5. Small size: small volume, only as big as the motor appearance, noneed complicated Electric control box, it can work by imput DC powersupply;
6. Embedded process: the process use ARM chip, can be embeddedsecondary development for users. Realize the user's different controlfunction without comprehensive html. Save the cost of softwaredevelopment;
7. Support external LCD screen: color screen can easily realizeexternal data show, making users' products more upscale.
8. Low cost: the product is the best in the same products. It simplify thecomplex design and programming so that greatly reduced cost.
Lead port instructions
電源輸入引線端口 | |
紅/白+ | 直流5~24V正極 |
綠/白- | 直流負極 |
控制輸入引線信號 | |
紅(黑) | 紅為控制公共端口正極,或黑為公共端口負極 |
黃 | 點動正轉 |
綠 | 點動反轉 |
棕 | 定長正轉 |
橙 | 定長反轉 |
白 | 編程模式運行(控制程序可按客戶要求定制) |
藍 | 停止 |
輸出信號引線端口:按客戶要求定制 |
RS232 RS485 port intructions
端子號 | 符 號 | 名 稱 | 說 明 |
1 | A | RS485數據端A | |
2 | +5V | 電源正端+5V | 僅供外部手操器 |
3 | TxD | RS232發送端 | |
4 | GND | 電源地 | 0V |
5 | RxD | RS232接收端 | |
6 | B | RS485數據端B |
圖2RS232、485接口引腳排列定義
ST-MDC42H電機驅動控制外形圖
Dimensions(外形圖): unit=mm
ST-MDC57H電機驅動控制外形圖
Dimensions(外形圖): unit=mm
ST-MDC86H 電機驅動控制外形圖
Dimensions(外形圖): unit=mm